Enable Instant Secure Port Profile on a Port

Create the Instant Secure Port Profile (ISPP) switch template, see ISPP Configuration from Switch Template.

Use this task to enable ISPP on a port.

  1. Go to Configure > Network Policies page.
  2. Edit an existing template, or create a new switch template.
  3. From the left pane, select Port/VLAN Configuration.
  4. Enable or disable the Instant Secure Port Profile for any specific ports:
    1. Select the profile to use in the Port Profile dropdown menu.
    2. Enable or disable the profile on a port by using the Instant Profile toggle switches in the Configure Ports Individually section.
      Note

      Note

      The switch can only have Instant Port or Instant Secure Port enabled, but not both.
  5. Enable User Auth or MAC Auth or both.
  6. Specify the Port Type, such as Access, Trunk, or Phone:
    1. Create or edit your selected Port Type.
    2. Select the Port Usage within the Port Name & Usage tab.
  7. After all the ports are configured, select SAVE.
    Click to expand in new window
    ISPP Individual Port Configuration
9038988-00 Rev AA